Buffalo Dreams

Creative Challenges, illustrations, Redbubble Shop, Skulls

I made an abstract post a while back called Playing with Pastels that had close ups of this piece as a work in progress…though the piece was finished quite a while ago I did not post the final outcome because I wanted to have it professionally framed – fun fact, this is the first piece I have ever gotten professionally framed!

This started off as a quick pencil sketch I did at the end of inktober 2015 (this was the first inktober that I participated in, more about that here).

Screen Shot 2017-08-31 at 3.18.00 PM

Inspired by a piece I did about 2 years ago, where I wanted to experiment with a couple of black canvases I picked up from Michael’s and my tinted charcoals (more about this piece here) where I took my #31 inktober 2015 piece as inspiration to build upon.

IMG_8963

Inktober 31

Screen Shot 2017-08-31 at 3.22.37 PM

Using my small sketch for reference, I penciled an outline on a black 18″x24″ canvas, then applied layers and layers of pastel, pencil crayons & charcoal; constantly switching between the three mediums until I was sure the piece was complete.

Screen Shot 2017-08-31 at 3.18.36 PM

Due to the dusty nature of chalk pastels, I started at the centre of the subject and worked my way out, saving the background for last; not wanting to risk smudging any loose pigment onto the black surface.

Screen Shot 2017-08-31 at 3.18.18 PM

This sat around in my studio for months, I was afraid to transport it anywhere!

Now I know what you are thinking “isn’t there a protective spray you can use to prevent smudging?” believe me, I tried it! The drawback of the protective spray was that it was not 100% protected – chalk pastels being more loose than graphite there is also risk of some loose pigment being scattered among the work – plus it dulled the colours, so I needed to go over the piece again with the pastels to revive this lost vibrance.

When it came time for framing I carefully wrapped the piece in brown packing paper. I am very proud of this piece and due to the risk of smudging I was pretty leery to leave it in the hands of strangers. Not sure if there were any good framers in the area, I decided to go to our local Michael’s, where they made a special note to be vary careful with the piece as it is prone to smudging; needless to say the staff there did a fantastic job and were very gentle with the piece πŸ™‚

I couldn’t believe how many different combinations and choices there are for frames & matting; in fact, we probably spent about an hour looking at different matting choices!

For me the frame was simple, I wanted something a bit more modern and black – fortunately they had a 40% deal when I went in (framing this 18″x24″ beast was just under $500 CND and would of been over $700 CND without the deal…highway robbery if you ask me lol but they need to run their business too lol). The matting on the other hand is what took the most time, is was very interesting to see how different combinations looked with the piece and how it could go from a strong masculine piece to a dainty feminine piece in a flash! Personally, I prefer a more masculine, modern look (makes sense with what I have learned about my work during my first Artwalk haha). So I chose a black frame with charcoal grey, pomegranate red wine and black matting – I really wanted to have the red wine accent colours pop – some of the other matting was either just not the right colour combinations or were too much like the dominant colours that the piece felt pale and blended with the matting.

img_3325

I also asked if I could write the name of the piece & sign the matting – since this was my first original being framed I thought it would be a nice touch – and the staff were more than happy to oblige. When the matting arrived, they called me and I went in (bought a couple of jelly roll white pens) and decided upon the name “Buffalo Dreams” and signed the matting.

Buffalo Dreams seemed like a perfect fit for the piece, making it whimsical and spiritual. Growing up my mother had a huge dreamcatcher – made of red wood with purple crystals, black leather ties and feathers – when we had nightmares my mom would either put the dreamcatcher in our rooms for the night or longer if need be (probably to keep us in our own beds to get some proper rest, smart lady!). That was until she got us our own small dreamcatchers. She would tell us that they are made special to protect us in our sleep; if you have a nightmare it cannot hurt you as the dream catcher acts like a spider web, catching all the negative dreams, spirits and thoughts to purify or trap them in the crystals so you can sleep safe and sound.

If you have a piece that is special to you or are very proud of go ahead and spoil yourself a bit and get it framed! I find frames (even cheaper ones from department stores) really make a piece look polished and complete.

Prints and other swag available in my Redbubble shop of this piece (more about my shop can be found in an earlier post here Redbubble shop). If you are interested in purchasing the original please contact me and I can let you know the price and we can work out shipping/pick up arrangements.

a111ac66-4988-4050-8e8d-1987038b33bb

Remember to follow me on Instagram & Twitter @noelle_fontainec to see what kind of creative mischief I have gotten myself into.

Thank you for reading πŸ™‚

Jolly Rancher Skull Studio Pouch

My Redbubble Shop

Blog Post, illustrations, Redbubble Shop

It has been a while since I made my account on redbubble.com, just never really could make the time to create or post illustrations; However, I find myself with some more time on my hands, which allows me to create and post to my shop!

I will have many of my illustrations up on the site as t-shirts, tank tops, laptop cases & skins, phone cases, bags & so much more!

You can check it out here: Noelle Fontaine’s Redbubble Shop

Take a sneak peak at my wares:

Here is some information: About Redbubble

Also, don’t forget to follow me on Instagram or Twitter for the most up to date info on new creations & promotions!

Thanks for reading πŸ™‚

Halo Master Chief

Blog Post, fan art, illustrations

My big little brother is a Halo master! Master Chief CJ, Halo MASTER!!!

He lives, breaths, eats halo & it shows! The things he unlocks in the game & how good he is at playing it amazes me, not to mention his online gamer friends! I wish he would post his gaming skills because they are insane.


REWIND: He is my β€œBig Little Brother” because he is the baby of the family but is about 6 feet tall. He just turned 20 January 23rd, its hard to believe he is already 20!

So it is clear the inspiration for this illustration (which was his bday present πŸ˜› ) is my big little brother, Justyn.


The Materials:
β€’ Bainbridge Illustration Board
β€’ X-Acto Knife
β€’ Watercolour Paint
β€’ Masking/Transfer Tape
β€’ Faber Castell Watercolour Pencils
β€’ Prismacolor Premier Pencil Crayons
β€’ Steadler Pigment Liner 0.1
β€’ Sharpie Extra Fine Point
β€’ Jelly Roll 08 White Jelly Pen
β€’ Reference Pic
β€’ Pencil & Eraser
β€’ Wooden Board
The Process:


1. On the Illustration board I sketched out the rough image, using reference image, then added the details

2. Outline final sketch & details with Steadler Pigment Liner 0.1

3. Mask off entire sketch with the transfer tape

4. With the x-acto knife lightly trim round the boarder & character. (Be sure to use a sharp blade & do not push down too hard, you do not want to cut the illustration board)

5. Peel the pieces of the tape off the background (only in areas you want to be painted)

6. Painted the background with water colour paints, starting with a light purple, gradually fading into darker a darker shade of purple to blue to black.

7. After 2 layers of this I used a dry brush, dipped it in white paint & spattered it over the entire image to create stars.

8. Once this dries, peel the tape covering the image & start blocking in colour with the watercolour pencils & blend with water, when it dried I did a second layer to add more dimensions with shadows, keeping the highlighted areas light from the start (it is easier to keep the white areas light than trying to add them back in)

9. Once this dried I used prismacolour pencil crayons (they go on creamy & blend awesome) over top to finish adding colour & dimension to the image

10. I did the pencil crayon one section at a time, using the extra fine tip sharpie to go over my existing ink lines to make them pop more, while adding some line work for shading (the pencil crayons pushed the strength of the felt back)

11. Once this was complete I used my Jelly Roll pen to add some texture to the highlighted ares & some stars to the background.

12. Peel off the rest of the transfer tape & framed the image (I made the illustration 8.5”x11” so I trimmed the matting of an 8”x10” frame to showcase the entire illustration)

Let me know what you think of this illustration, & of any critiques you may have. Don’t forget to follow me on my social to see what I am working on in real time!

Thank you for reading πŸ™‚